模拟声光驱动电源
Analog Acousto-optic Drive Power
Model：GA-RF-M-080M-2.5W-R2
技术要求 Technical Requirements
1.功能及性能Functions and Performance
a) 输出信号频率：80MHz
Output signal frequency: 80MHz
b) 工作电压：DC +24V±0.5V
a) 工作频率80MHz
Operating frequency 80MHz
b) 驱动器最大输出功率≥2.5W
Maximum output power of the driver≥2.5W
c) 调制方式：模拟调制
Modulation mode:Analog modulation
d) 谐波抑制比：≥25dBc
Harmonic rejection ratio≥25dBc
e) 调制电压：调制输入0-1V（信号发生器输入电压0~1V,再设置需要降频的频率即可）
Modulation voltage: modulation input 0-1V (signal generator input voltage 0-1V, and then set the frequency that needs to be reduced)
f) 线性范围：0.5-1V
Linear range:0.5-1V
g) 驱动器关断时间时间小于70ns
The drive shutdown time is less than 70ns
2.接口要求 Interface Requirements
信号输出接口Signal Output Interface Signa | SMA-K |
控制信号输入接口Control Signal Input Interface | SMA-K |
电源接口 Power Interface | 穿心电容Through-center capacitor |
输出功率调节接口Output Power Adjustment Interface | Ø3mm，一字型多圈电位器 (内部调节) One Piece Multi-turn Potentiometer (Internal Adjustment) |
|