爱立信Ericsson FSU 995PM保偏光纤熔接机 - 深圳市光比纳通信有限公司

Description: Based on the well-known FSU 995 series, the FSU 995 PM comes with all the features you have come to expect from Ericsson’s fusion splicers – erbium splicing, thin core fiber splicing and attenuator making. Add the ability to splice PM fibers with an extremely high yield and you have a sure winner! The FSU 995 PM uses the Ericsson unique POL alignment, rotating both PM fibers 360 degrees, which gives a more accurate alignment than any other comparable system. It is equipped with software for up- and download, which means that you can create new splice programs on a PC and send it to a network of splicers. You can also download all data from the splicer and your measurement instrument onto an Excel files and keep track of the splicing results. The FSU 995 PM comes with features, such as thin core alignment, negative index matching and automatic arc re-centering. There are also powerful profile analysis tools that are very helpful during splice program optimization. It achieves low splice losses and high extinction ratios through a method that automatically rotates the fibers to the optimal splicing position. This unit has the following specifications: Fiber Types: Single-Mode (SMF), Multi-Mode (MMF), Erbium Fibers (EDF), Dispersion-Shifted (DSF), Non-Zero Dispersion Shifted (NZ-DSF) (LEAF, TrueWave etc.), Cut-off Shifted (CSF), Dispersion compensating (DCF), Panda PM fiber, Bow-tie PM fiber, Elliptical core PM fiber, Elliptical Jacket PM fiber Fiber Diameters: 80/160 µm to 125/900 µm fibers Typical Splice Loss: Typical 0.02dB for identical SM fibers; Typical 0.01dB for identical MM fibers Typical Return Loss: > 60dB Typical Extinction Ratio: 32.2 dB High Strength Splicing: Depending on prep tools 20-40 N (clamping on coating); Equipped with platforms for fiber holders Splice Programs: 20 predefined; 40 programmable Splice Modes: Automatic or Manual Estimation Technique: Warm image, core-to-core detection, based on Mode Field Diameter (MFD) mismatch and Micro Bending Theory Monitor: 3.5” color LCD